Wiko

Wiko View Max

Wiko_View_Max_MT6739_V01.43_270918_8.1.0.zip
June 16, 2026 Wiko 1.25 GB Wiko

Wiko View Max is a Wiko firmware file listed under Wiko, distributed as Wiko_View_Max_MT6739_V01.43_270918_8.1.0.zip with a download size of 1.25 GB. It is built for the MediaTek MT6739 chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.25 GB
Download Free

About Wiko View Max

Looking for the official stock firmware for your Wiko View Max? You're in the right place. Below is the original Wiko flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Wiko View Max back to square one. File Name: Wiko_View_Max_MT6739_V01.43_270918_8.1.0.zip File Size: 1.25 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Wiko View Max should run like a brand new unit.

File Details

File nameWiko View Max
PackageWiko_View_Max_MT6739_V01.43_270918_8.1.0.zip
Brand / PlatformWiko
CategoryWiko
ChipsetMediaTek MT6739
Android versionAndroid 8.1 (Oreo)
Flash toolSP Flash Tool
Package formatZIP archive
File size1.25 GB
Date addedJune 16, 2026
PriceFree

How to flash Wiko View Max with SP Flash Tool

  1. Confirm Wiko View Max matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.25 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Wiko View Max free to download?

Yes, Wiko View Max can be downloaded free of charge from this page.

How large is the download?

The Wiko View Max package is 1.25 GB.

Which tool do I need to flash Wiko View Max?

Wiko View Max is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Wiko View Max?

This firmware is Android 8.1 (Oreo).

Which devices is this firmware for?

This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.

More Wiko files

Back to Wiko