Wiko W-K130
Wiko W-K130 is a Wiko firmware file listed under Wiko, distributed as Wiko_W-K130_SC7731E_V01.15_030919_8.1_SPD.zip with a download size of 812 MB. It is built for the Unisoc (Spreadtrum) SC7731E chipset and runs Android 8.1 (Oreo). It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 16 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko W-K130
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Wiko W-K130 owners, this page hosts the original Wiko stock ROM and the key file details. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Wiko W-K130 a fresh start without the clutter that builds up over time. File Name: Wiko_W-K130_SC7731E_V01.15_030919_8.1_SPD.zip File Size: 812 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Wiko W-K130 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Wiko W-K130 |
|---|---|
| Package | Wiko_W-K130_SC7731E_V01.15_030919_8.1_SPD.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | Unisoc (Spreadtrum) SC7731E |
| Android version | Android 8.1 (Oreo) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 812 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko W-K130 with SPD ResearchDownload
- Confirm Wiko W-K130 matches your exact device model and that the phone uses the SC7731E chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (812 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Wiko W-K130 free to download?
Yes, Wiko W-K130 can be downloaded free of charge from this page.
How large is the download?
The Wiko W-K130 package is 812 MB.
Which tool do I need to flash Wiko W-K130?
Wiko W-K130 is Unisoc (Spreadtrum) SC7731E firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Wiko W-K130?
This firmware is Android 8.1 (Oreo).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.