Wiko Y50 W-K130
Wiko Y50 W-K130 is a Wiko firmware file listed under Wiko, distributed as Wiko_Y50_W-K130_TMV_V01.15_20_8.1_ASI_SPD.zip with a download size of 812 MB. It is built for Unisoc (Spreadtrum)-based devices and runs Android 8.1 (Oreo). It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 12 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko Y50 W-K130
Looking for the official stock firmware for your Wiko Y50 W-K130? You're in the right place. Below is the original Wiko flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Wiko Y50 W-K130 to factory condition. File Name: Wiko_Y50_W-K130_TMV_V01.15_20_8.1_ASI_SPD.zip File Size: 812 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Wiko Y50 W-K130 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Wiko Y50 W-K130 |
|---|---|
| Package | Wiko_Y50_W-K130_TMV_V01.15_20_8.1_ASI_SPD.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Platform | Unisoc (Spreadtrum) |
| Android version | Android 8.1 (Oreo) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 812 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko Y50 W-K130 with SPD ResearchDownload
- Confirm Wiko Y50 W-K130 matches your exact device model and that it is intended for Wiko hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (812 MB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Wiko Y50 W-K130 free to download?
Yes, Wiko Y50 W-K130 can be downloaded free of charge from this page.
How large is the download?
The Wiko Y50 W-K130 package is 812 MB.
Which tool do I need to flash Wiko Y50 W-K130?
Wiko Y50 W-K130 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Wiko Y50 W-K130?
This firmware is Android 8.1 (Oreo).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.