Wiko Y60
Wiko Y60 is a Wiko firmware file listed under Wiko, distributed as Wiko_Y60_MT6739_V31_EEA_070319_9.0.zip with a download size of 973 MB. It is built for the MediaTek MT6739 chipset and runs Android 9 (Pie). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko Y60
The Wiko Y60 runs on Wiko's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Wiko Y60 to factory condition. File Name: Wiko_Y60_MT6739_V31_EEA_070319_9.0.zip File Size: 973 MB Back up your files, charge the Wiko Y60 past 50 percent, install the matching drivers, and only then begin. When it finishes, the Wiko Y60 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Wiko Y60 |
|---|---|
| Package | Wiko_Y60_MT6739_V31_EEA_070319_9.0.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | MediaTek MT6739 |
| Android version | Android 9 (Pie) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 973 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko Y60 with SP Flash Tool
- Confirm Wiko Y60 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (973 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Wiko Y60 free to download?
Yes, Wiko Y60 can be downloaded free of charge from this page.
How large is the download?
The Wiko Y60 package is 973 MB.
Which tool do I need to flash Wiko Y60?
Wiko Y60 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Wiko Y60?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.