# Wiko View Max

> Wiko View Max is a Wiko firmware file listed under Wiko, distributed as Wiko_View_Max_MT6739_V01.43_270918_8.1.0.zip with a download size of 1.25 GB. It is built for the MediaTek MT6739 chipset and runs Android 8.1. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/wiko-view-max-118420>

## File details

- **File name:** Wiko View Max
- **Package:** Wiko_View_Max_MT6739_V01.43_270918_8.1.0.zip
- **Brand / platform:** Wiko
- **Category:** [Wiko](https://www.filefirmware.com/category/wiko)
- **Chipset:** MediaTek MT6739
- **Android version:** Android 8.1 (Oreo)
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1.25 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/wiko-view-max-118420>

## About Wiko View Max

Looking for the official stock firmware for your Wiko View Max? You're in the right place. Below is the original Wiko flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Wiko View Max back to square one. File Name: Wiko_View_Max_MT6739_V01.43_270918_8.1.0.zip File Size: 1.25 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Wiko View Max should run like a brand new unit.

## How to flash Wiko View Max with SP Flash Tool

1. Confirm Wiko View Max matches your exact device model and that the phone uses the MT6739 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1.25 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6739 Firmware Guide: Flashing Tools and Instructions](https://www.filefirmware.com/blog/mt6739-firmware-guide-flashing-tools-and-instructions): The MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Wiko View Max free to download?

Yes, Wiko View Max can be downloaded free of charge from its web page.

### How large is the download?

The Wiko View Max package is 1.25 GB.

### Which tool do I need to flash Wiko View Max?

Wiko View Max is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Wiko View Max?

This firmware is Android 8.1 (Oreo).

### Which devices is this firmware for?

This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.

## More Wiko files

- [Wiko Y80](https://www.filefirmware.com/file/wiko-y80-118447) — 1.63 GB
- [Wiko Y80 W-V720](https://www.filefirmware.com/file/wiko-y80-w-v720-118440) — 1.63 GB
- [Wiko Y50 W-K130](https://www.filefirmware.com/file/wiko-y50-w-k130-118436) — 812 MB
- [Wiko Y61](https://www.filefirmware.com/file/wiko-y61-118432) — 1 GB
- [Wiko W-K130](https://www.filefirmware.com/file/wiko-w-k130-118430) — 812 MB
- [Wiko Y60](https://www.filefirmware.com/file/wiko-y60-118429) — 973 MB
- [Wiko Wim Lite ALT](https://www.filefirmware.com/file/wiko-wim-lite-alt-118428) — 2 GB
- [Wiko W-K600](https://www.filefirmware.com/file/wiko-w-k600-118427) — 1.40 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/wiko-view-max-118420>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
