Wiko Wim Lite ALT
Wiko Wim Lite ALT is a Wiko firmware file listed under Wiko, distributed as Wiko_Wim_Lite_ALT_MSM8937_V02.05_210917_7.1_QPST.zip with a download size of 2 GB. It is built for the Qualcomm MSM8937 chipset and runs Android 7.1 (Nougat). It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko Wim Lite ALT
If your Wiko Wim Lite ALT has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Wiko flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Wiko Wim Lite ALT back to square one. File Name: Wiko_Wim_Lite_ALT_MSM8937_V02.05_210917_7.1_QPST.zip File Size: 2 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Wiko Wim Lite ALT restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Wiko Wim Lite ALT |
|---|---|
| Package | Wiko_Wim_Lite_ALT_MSM8937_V02.05_210917_7.1_QPST.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | Qualcomm MSM8937 |
| Android version | Android 7.1 (Nougat) |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko Wim Lite ALT with QFIL
- Confirm Wiko Wim Lite ALT matches your exact device model and that the phone uses the MSM8937 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Wiko Wim Lite ALT free to download?
Yes, Wiko Wim Lite ALT can be downloaded free of charge from this page.
How large is the download?
The Wiko Wim Lite ALT package is 2 GB.
Which tool do I need to flash Wiko Wim Lite ALT?
Wiko Wim Lite ALT is Qualcomm MSM8937 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
What Android version is Wiko Wim Lite ALT?
This firmware is Android 7.1 (Nougat).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.