Wiko W-K600
Wiko W-K600 is a Wiko firmware file listed under Wiko, distributed as Wiko_W-K600_MT6739_050418_7.1.1.zip with a download size of 1.40 GB. It is built for the MediaTek MT6739 chipset and runs Android 7.1 (Nougat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko W-K600
The Wiko W-K600 runs on Wiko's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Wiko_W-K600_MT6739_050418_7.1.1.zip File Size: 1.40 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Wiko W-K600 should run like a brand new unit.
File Details
| File name | Wiko W-K600 |
|---|---|
| Package | Wiko_W-K600_MT6739_050418_7.1.1.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | MediaTek MT6739 |
| Android version | Android 7.1 (Nougat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.40 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko W-K600 with SP Flash Tool
- Confirm Wiko W-K600 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.40 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Wiko W-K600 free to download?
Yes, Wiko W-K600 can be downloaded free of charge from this page.
How large is the download?
The Wiko W-K600 package is 1.40 GB.
Which tool do I need to flash Wiko W-K600?
Wiko W-K600 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Wiko W-K600?
This firmware is Android 7.1 (Nougat).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.