Wiko Y80
Wiko Y80 is a Wiko firmware file listed under Wiko, distributed as Wiko_Y80_SC9863A_V38_180610_9.0_SPD.zip with a download size of 1.63 GB. It is built for the Unisoc (Spreadtrum) SC9863A chipset and runs Android 9 (Pie). It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 31 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko Y80
Looking for the official stock firmware for your Wiko Y80? You're in the right place. Below is the original Wiko flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Wiko Y80 back to square one. File Name: Wiko_Y80_SC9863A_V38_180610_9.0_SPD.zip File Size: 1.63 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Wiko Y80 should run like a brand new unit.
File Details
| File name | Wiko Y80 |
|---|---|
| Package | Wiko_Y80_SC9863A_V38_180610_9.0_SPD.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | Unisoc (Spreadtrum) SC9863A |
| Android version | Android 9 (Pie) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.63 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko Y80 with SPD ResearchDownload
- Confirm Wiko Y80 matches your exact device model and that the phone uses the SC9863A chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.63 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Wiko Y80 free to download?
Yes, Wiko Y80 can be downloaded free of charge from this page.
How large is the download?
The Wiko Y80 package is 1.63 GB.
Which tool do I need to flash Wiko Y80?
Wiko Y80 is Unisoc (Spreadtrum) SC9863A firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
What Android version is Wiko Y80?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.