Wiko

Wiko Upulse Lite

Wiko_Upulse_Lite_MT6737M_V18_26102017.zip
June 16, 2026 Wiko 2 GB Wiko

Wiko Upulse Lite is a Wiko firmware file listed under Wiko, distributed as Wiko_Upulse_Lite_MT6737M_V18_26102017.zip with a download size of 2 GB. It is built for the MediaTek MT6737M chipset, with a firmware build date of October 26, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Wiko Upulse Lite

If your Wiko Upulse Lite has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Wiko flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Wiko Upulse Lite to factory condition. File Name: Wiko_Upulse_Lite_MT6737M_V18_26102017.zip File Size: 2 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Wiko Upulse Lite should run like a brand new unit.

File Details

File nameWiko Upulse Lite
PackageWiko_Upulse_Lite_MT6737M_V18_26102017.zip
Brand / PlatformWiko
CategoryWiko
ChipsetMediaTek MT6737M
Build dateOctober 26, 2017
Flash toolSP Flash Tool
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Wiko Upulse Lite with SP Flash Tool

  1. Confirm Wiko Upulse Lite matches your exact device model and that the phone uses the MT6737M chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Wiko Upulse Lite free to download?

Yes, Wiko Upulse Lite can be downloaded free of charge from this page.

How large is the download?

The Wiko Upulse Lite package is 2 GB.

Which tool do I need to flash Wiko Upulse Lite?

Wiko Upulse Lite is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.

More Wiko files

Back to Wiko