Which tool is used to flash MT6737M firmware?

The SP Flash Tool is used for flashing this chipset.

What is the risk of using Format All + Download?

Using Format All + Download on MediaTek devices erases IMEI and NVRAM calibration.

What should I do if the device is not detected by the tool?

Power the phone off and connect it while holding the Volume Up or Volume Down button.

MT6737M Firmware: Flashing Guide and Supported Devices

The MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your specific model and the SP Flash Tool.

MT6737M Chipset Overview and Supported Brands

The MT6737M chipset is integrated into numerous mobile devices across various manufacturers. Because this chipset is used by many different brands, it is critical to identify the exact model of your device before attempting to flash any firmware. Using a file intended for a different model can lead to a permanent brick.

Based on our library of 1,206 matching files, several brands frequently utilize the MT6737M chipset. Some of the most common brands seen in our database include Vertex, Motorola, Blu, Homtom, and Himax. Other manufacturers using this platform include Nuu, Archos, Tecno, Prestigio, and Leagoo.

If you are looking for firmware for a specific brand, you can browse our dedicated categories, such as /category/vertex, /category/motorola, or /category/blu.

Android Versions for MT6737M Devices

Devices powered by the MT6737M chipset run various versions of the Android operating system depending on the device's release date and manufacturer specifications. Analyzing the 600 most recently added files for this chipset reveals a broad distribution of Android versions.

The most common version associated with this chipset is Android 7.0. Android 6.0 is also widely prevalent. A smaller number of devices utilize Android 8.1, while very few instances of Android 7.1 and Android 5.1 have been recorded. When downloading a flash file, ensure the Android version is compatible with your device's original factory specifications to avoid stability issues.

Required Tools and Drivers for Flashing

To successfully flash firmware onto an MT6737M device, you must have the correct software environment configured on your computer. This chipset operates on the MediaTek platform, which requires specific drivers to communicate with the PC while the device is in a powered-off state.

Software and Drivers

The primary tool used for this chipset is the SP Flash Tool. This utility allows the user to write the firmware partitions directly to the device's internal storage. To ensure the computer recognizes the phone in the correct mode, you must install the MediaTek VCOM / USB drivers. Without these drivers, the SP Flash Tool will not be able to establish a connection with the device.

Firmware Components

The firmware package must contain a scatter file, typically named MTxxxx_Android_scatter.txt. The scatter file acts as a map for the SP Flash Tool, telling the software exactly where each partition (such as the system, boot, and recovery) should be written on the device's memory chip.

Step-by-Step Guide to Flashing MT6737M Firmware

Reflashing a device requires a precise sequence of actions. If you are unfamiliar with the software, you can refer to our detailed guide on /blog/how-to-use-sp-flash-tool-mediatek-firmware-flashing-guide.

Prepare the Environment: Install the MediaTek VCOM / USB drivers on your Windows PC. Extract the downloaded firmware package and the SP Flash Tool to a folder on your local drive.
Launch the Tool: Open the SP Flash Tool executable.
Load the Scatter File: In the "Scatter-loading File" field, click "choose" and navigate to the firmware folder. Select the MTxxxx_Android_scatter.txt file.
Configure Flash Mode: Ensure that the dropdown menu is set to "Download Only."
Initiate the Process: Click the "Download" button. The tool is now waiting for the device to be connected.
Connect the Device: Power the phone off completely. While the device is off, connect it to the PC using a high-quality USB cable. If the tool does not detect the device, try holding the Volume Up or Volume Down button while plugging in the cable.
Complete the Flash: The progress bar at the bottom of the tool will fill as the partitions are written. Once the process is finished, a green checkmark will appear.
Reboot: Disconnect the device and power it on. The first boot after a flash may take several minutes.

Critical Safety Rules for MediaTek Flashing

Flashing firmware involves writing directly to the system partitions of your device. A single mistake can result in a "hard brick," rendering the device unrecoverable. Follow these safety protocols strictly.

Verify Model Compatibility Always confirm that the firmware matches the exact device model before flashing. Even if two devices look identical or use the same MT6737M chipset, they may have different hardware revisions or screen drivers. Flashing the wrong firmware can disable the display or other hardware components.

Data Backup Flashing can erase all data on the device. Always back up your personal files, contacts, and media before starting the process.

Power Management Ensure the device battery is charged above 50%. If the device loses power during the flashing process, the partition table may be corrupted, which can lead to a bricked device. Never disconnect the USB cable while the SP Flash Tool is actively writing data.

Avoid "Format All + Download" In the SP Flash Tool, you will see several options for flashing. You must use "Download Only." Do not use "Format All + Download," as this option erases the IMEI and NVRAM calibration data. Losing this data will result in the device losing its network connectivity and cellular signal.

Out of Scope Operations This guide is intended for device recovery and official firmware updates. Instructions regarding IMEI changing, FRP (Factory Reset Protection) or Google-account bypass, and carrier-lock circumvention are out of scope and are not provided.

Example MT6737M Firmware Files

Below are examples of firmware files available in our library for devices utilizing the MT6737M chipset. These files include the necessary scatter files for use with the SP Flash Tool.

XGody X17 Pro: Xgody_X17_Pro_MT6737M_01052018_6.0.zip (686 MB)
Wiko Upulse Lite: Wiko_Upulse_Lite_MT6737M_V18_26102017.zip (2 GB)
Walton Primo GF7: Walton_Primo_GF7_MT6737M_V07_03072018.zip (822 MB)
Vsun Mars Touch: Vsun_Mars_Touch_MT6737M_251017_7.0.zip (1.28 GB)
Vsun Mercury Tough: Vsun_Mercury_Tough_MT6737M_20180224_7.0.zip (1 GB)
Vestel V4: Vestel_V4_MT6737M_V1.19.0_18052018_7.0.zip (1 GB)
Vertex Tab 4G 8-1: Vertex_Tab_4G_8-1_MT6737M_V07_20180201.zip (1.1 GB)
Vertex Tab 4G 10-1: Vertex_Tab_4G_10-1_MT6737M_R07_20180202.zip (1 GB)
Vertex Tiger: Vertex_Tiger_MT6737M_HW1_R1_V20_180614.zip (1.1 GB)
Vertex Impress Vega: Vertex_Impress_Vega_MT6737M_HW1_R01_V03_20190527.zip (1.2 GB)
Vertex Impress Reef: Vertex_Impress_Reef_MT6737M_HW1_R1_V07_180906.zip (1 GB)
Vertex Impress Lagune: Vertex_Impress_Lagune_MT6737M_HW1_R1_V10_270418.zip (1.1 GB)

This guide was drafted with AI assistance from File Firmware's firmware database and reviewed and edited by Admin. Flashing always carries some risk — if a step doesn't match what you see on your device, stop and tell us.