Wiko

Wiko Tommy 3

Wiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip
June 16, 2026 Wiko 801 MB Wiko

Wiko Tommy 3 is a Wiko firmware file listed under Wiko, distributed as Wiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip with a download size of 801 MB. It is built for the MediaTek MT6739 chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 21 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
801 MB
Download Free

About Wiko Tommy 3

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Wiko Tommy 3 owners, this page hosts the original Wiko stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Wiko Tommy 3 back to square one. File Name: Wiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip File Size: 801 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Wiko Tommy 3 should run like a brand new unit.

File Details

File nameWiko Tommy 3
PackageWiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip
Brand / PlatformWiko
CategoryWiko
ChipsetMediaTek MT6739
Android versionAndroid 8.1 (Oreo)
Flash toolSP Flash Tool
Package formatZIP archive
File size801 MB
Date addedJune 16, 2026
PriceFree

How to flash Wiko Tommy 3 with SP Flash Tool

  1. Confirm Wiko Tommy 3 matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (801 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Wiko Tommy 3 free to download?

Yes, Wiko Tommy 3 can be downloaded free of charge from this page.

How large is the download?

The Wiko Tommy 3 package is 801 MB.

Which tool do I need to flash Wiko Tommy 3?

Wiko Tommy 3 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Wiko Tommy 3?

This firmware is Android 8.1 (Oreo).

Which devices is this firmware for?

This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.

More Wiko files

Back to Wiko