# Wiko Tommy 3

> Wiko Tommy 3 is a Wiko firmware file listed under Wiko, distributed as Wiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip with a download size of 801 MB. It is built for the MediaTek MT6739 chipset and runs Android 8.1. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/wiko-tommy-3-118389>

## File details

- **File name:** Wiko Tommy 3
- **Package:** Wiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip
- **Brand / platform:** Wiko
- **Category:** [Wiko](https://www.filefirmware.com/category/wiko)
- **Chipset:** MediaTek MT6739
- **Android version:** Android 8.1 (Oreo)
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 801 MB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/wiko-tommy-3-118389>

## About Wiko Tommy 3

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Wiko Tommy 3 owners, this page hosts the original Wiko stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Wiko Tommy 3 back to square one. File Name: Wiko_Tommy_3_MT6739_V01.15_311018_8.1.0.zip File Size: 801 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Wiko Tommy 3 should run like a brand new unit.

## How to flash Wiko Tommy 3 with SP Flash Tool

1. Confirm Wiko Tommy 3 matches your exact device model and that the phone uses the MT6739 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (801 MB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6739 Firmware Guide: Flashing Tools and Instructions](https://www.filefirmware.com/blog/mt6739-firmware-guide-flashing-tools-and-instructions): The MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Wiko Tommy 3 free to download?

Yes, Wiko Tommy 3 can be downloaded free of charge from its web page.

### How large is the download?

The Wiko Tommy 3 package is 801 MB.

### Which tool do I need to flash Wiko Tommy 3?

Wiko Tommy 3 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Wiko Tommy 3?

This firmware is Android 8.1 (Oreo).

### Which devices is this firmware for?

This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.

## More Wiko files

- [Wiko Y80](https://www.filefirmware.com/file/wiko-y80-118447) — 1.63 GB
- [Wiko Y80 W-V720](https://www.filefirmware.com/file/wiko-y80-w-v720-118440) — 1.63 GB
- [Wiko Y50 W-K130](https://www.filefirmware.com/file/wiko-y50-w-k130-118436) — 812 MB
- [Wiko Y61](https://www.filefirmware.com/file/wiko-y61-118432) — 1 GB
- [Wiko W-K130](https://www.filefirmware.com/file/wiko-w-k130-118430) — 812 MB
- [Wiko Y60](https://www.filefirmware.com/file/wiko-y60-118429) — 973 MB
- [Wiko Wim Lite ALT](https://www.filefirmware.com/file/wiko-wim-lite-alt-118428) — 2 GB
- [Wiko W-K600](https://www.filefirmware.com/file/wiko-w-k600-118427) — 1.40 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/wiko-tommy-3-118389>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
