Alcatel Pixi 4 (6) 3G
Alcatel Pixi 4 (6) 3G is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_4-6_3G_MT6580_5.1.zip with a download size of 1GB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Pixi 4 (6) 3G
Looking for the official stock firmware for your Alcatel Pixi 4 (6) 3G? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Alcatel Pixi 4 (6) 3G a fresh start without the clutter that builds up over time. File Name: Alcatel_OneTouch_Pixi_4-6_3G_MT6580_5.1.zip File Size: 1GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Alcatel Pixi 4 (6) 3G should run like a brand new unit.
File Details
| File name | Alcatel Pixi 4 (6) 3G |
|---|---|
| Package | Alcatel_OneTouch_Pixi_4-6_3G_MT6580_5.1.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Pixi 4 (6) 3G with SP Flash Tool
- Confirm Alcatel Pixi 4 (6) 3G matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel Pixi 4 (6) 3G free to download?
Yes, Alcatel Pixi 4 (6) 3G can be downloaded free of charge from this page.
How large is the download?
The Alcatel Pixi 4 (6) 3G package is 1GB.
Which tool do I need to flash Alcatel Pixi 4 (6) 3G?
Alcatel Pixi 4 (6) 3G is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel Pixi 4 (6) 3G?
This firmware is Android 5.1 (Lollipop).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.