MT6580 Firmware Guide: Flashing Tools and Safety

The MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package and the SP Flash Tool.

MT6580 Chipset Overview and Device Compatibility

The MT6580 chipset is utilized by numerous mobile brands to power budget-friendly devices. Based on our library of 5,760 matching files, this chipset is common across a diverse range of manufacturers.

Some of the brands that utilize the MT6580 chipset include: * Blu * Qmobile * Digma * HuaweiClone * Wiko * Bytwo * ZHnK * Vertex * Samsung * MyPhone

Because so many different brands use this single chipset, it is critical to ensure that the firmware you download is designed specifically for your exact model number. Flashing firmware from a different model, even if it uses the same MT6580 chipset, can lead to a permanent brick.

Android Versions for MT6580 Devices

Devices powered by the MT6580 chipset run various versions of the Android operating system. Analysis of the 600 most recently added files in our database shows a wide distribution of OS versions.

The most common versions encountered for this chipset are Android 5.1 and Android 6.0. However, the chipset also supports several other versions, including: * Android 5.0 * Android 7.0 * Android 7.1 * Android 8.0 * Android 8.1 * Android 9

When searching for a flash file, verify which Android version your device originally shipped with to maintain system stability.

Required Flashing Tools and Drivers

To flash a device with an MT6580 chipset, you must use tools compatible with the MediaTek platform.

Flashing Tool

The primary tool used for this chipset is the SP Flash Tool. This software allows the user to communicate with the device in a pre-boot state to write the firmware partitions directly to the internal storage.

Required Drivers

For the computer to recognize the device in the necessary flashing mode, you must install the MediaTek VCOM / USB drivers. Without these drivers, the SP Flash Tool will not be able to establish a connection with the phone, resulting in a connection error.

Firmware Components

A compatible firmware package for the MT6580 must include a scatter file. This is a text file, typically named MTxxxx_Android_scatter.txt, which tells the SP Flash Tool exactly where each partition (such as system, recovery, and boot) should be written on the device's memory.

Step-by-Step Flashing Process with SP Flash Tool

Reflashing a MediaTek device requires a specific sequence to ensure the tool can communicate with the hardware.

1. Install the MediaTek VCOM / USB drivers on your PC.
2. Launch the SP Flash Tool.
3. Load the scatter file (MTxxxx_Android_scatter.txt) from your firmware folder into the tool.
4. Select the flashing mode. You must use "Download Only" to avoid erasing critical device data.
5. Power the phone off completely.
6. Connect the device to the PC via USB. If the tool does not detect the device immediately, hold the Volume Up or Volume Down button while connecting the cable.
7. Click the "Download" button in the tool to begin the process.
8. Wait for the process to complete, usually indicated by a green checkmark.

For a more detailed walkthrough on the software interface, see the How to Use SP Flash Tool: MediaTek Firmware Flashing Guide.

Critical Safety Rules for MediaTek Flashing

Flashing firmware carries inherent risks. To prevent permanent hardware damage or loss of device identity, follow these safety protocols.

Model Verification and Data Backup

Always confirm that the firmware matches the exact device model before starting. Flashing the wrong file can render the device unusable. Additionally, back up all personal data first, as the flashing process can erase the device.

Power Management

Ensure the battery is charged above 50% before beginning. Do not disconnect the USB cable or power off the computer during the flashing process, as an interruption can cause a hard brick.

Partition Safety

When using the SP Flash Tool on MediaTek devices, always select the "Download Only" option. Do not use "Format All + Download," as this option erases the IMEI and NVRAM calibration data. Losing this data can result in the device losing its ability to connect to cellular networks.

Scope of Service

Please note that instructions for changing IMEIs, bypassing FRP (Factory Reset Protection), bypassing Google accounts, or removing carrier locks are out of scope for this guide and are not provided.

Example MT6580 Firmware Files

Below are examples of firmware packages available for devices using the MT6580 chipset. These files demonstrate the variety of Android versions and package sizes associated with this hardware.

• ZXT ZA76 - Package: ZXT_ZA76_MT6580_20180516_8.1.0.zip (675 MB) - Download
• Zumm Titan - Package: Zumm_Titan_MT6580_T09_20161027_5.1.ZIP (634 MB) - Download
• ZTE U807 - Package: Itel_P13_Plus_MT6580_V014_20180731_8.1.zip (240 MB) - Download
• ZTE E7L - Package: ZTE_E7L_MT6580_20160301_5.1.zip (671 MB) - Download
• Zoom Ultra Q6 - Package: Zoom_Ultra Q6_Q6_MT6580_20180524_5.1.zip (631 MB) - Download
• Zoom Ultra - Package: Zoom_Ultra_MT6580_20180524_5.1.ZIP (631 MB) - Download
• Zoom Twister 5.0 - Package: Zoom_Twister_5.0_MT6580_H5001_V10_b2b5_V07_170719_6.0.ZIP (651 MB) - Download
• ZHnK Odyssey Nobel - Package: ZH&K_Odyssey Nobel_Nobel_MT6580_20170214_5.1.zip (590 MB) - Download
• Zigo Eon 53i - Package: Zigo_Eon_53i_MT6580_V01_20160314.ZIP (715 MB) - Download
• ZHnK Odyssey S2 - Package: ZHnK_Odyssey_S2_MT6580_20161226_5.1.zip (474 MB) - Download
• ZHnK Odyssey S1 - Package: ZHnK_Odyssey_S1_MT6580_20160112_5.1.zip (547 MB) - Download
• ZHnK Odyssey Pacman 2 - Package: ZH&K_Odyssey_Pacman_2_MT6580_20160601_5.1.zip (665 MB) - Download

For other brands, you can browse our all firmware brands section or visit specific categories such as BLU firmware, Wiko firmware, or Digma firmware.