Alcatel Pixi 7 i213
Alcatel Pixi 7 i213 is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_7_i213_MT8127_11122015_4.4.2.zip with a download size of 750 MB. It is built for the MediaTek MT8127 chipset and runs Android 4.4 (KitKat), with a firmware build date of December 11, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 35 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Pixi 7 i213
The Alcatel Pixi 7 i213 runs on Alcatel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel Pixi 7 i213 back to square one. File Name: Alcatel_OneTouch_Pixi_7_i213_MT8127_11122015_4.4.2.zip File Size: 750 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Alcatel Pixi 7 i213 should run like a brand new unit.
File Details
| File name | Alcatel Pixi 7 i213 |
|---|---|
| Package | Alcatel_OneTouch_Pixi_7_i213_MT8127_11122015_4.4.2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT8127 |
| Android version | Android 4.4 (KitKat) |
| Build date | December 11, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 750 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Pixi 7 i213 with SP Flash Tool
- Confirm Alcatel Pixi 7 i213 matches your exact device model and that the phone uses the MT8127 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (750 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel Pixi 7 i213 free to download?
Yes, Alcatel Pixi 7 i213 can be downloaded free of charge from this page.
How large is the download?
The Alcatel Pixi 7 i213 package is 750 MB.
Which tool do I need to flash Alcatel Pixi 7 i213?
Alcatel Pixi 7 i213 is MediaTek MT8127 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel Pixi 7 i213?
This firmware is Android 4.4 (KitKat), built on December 11, 2015.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.