Alcatel U5 3G 4047A
Alcatel U5 3G 4047A is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_U5_3G_4047A_MT6580_20180416_7.0.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset and runs Android 7.0 (Nougat), with a firmware build date of April 16, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 38 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel U5 3G 4047A
Looking for the official stock firmware for your Alcatel U5 3G 4047A? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel U5 3G 4047A back to square one. File Name: Alcatel_U5_3G_4047A_MT6580_20180416_7.0.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Alcatel U5 3G 4047A restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Alcatel U5 3G 4047A |
|---|---|
| Package | Alcatel_U5_3G_4047A_MT6580_20180416_7.0.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6580 |
| Android version | Android 7.0 (Nougat) |
| Build date | April 16, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel U5 3G 4047A with SP Flash Tool
- Confirm Alcatel U5 3G 4047A matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel U5 3G 4047A free to download?
Yes, Alcatel U5 3G 4047A can be downloaded free of charge from this page.
How large is the download?
The Alcatel U5 3G 4047A package is 1 GB.
Which tool do I need to flash Alcatel U5 3G 4047A?
Alcatel U5 3G 4047A is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel U5 3G 4047A?
This firmware is Android 7.0 (Nougat), built on April 16, 2018.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.