Alcatel Shine Lite 5080X
Alcatel Shine Lite 5080X is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_Shine_Lite_5080X_MT6737M_210119_6.0.zip with a download size of 1.13 GB. It is built for the MediaTek MT6737M chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 29 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Shine Lite 5080X
The Alcatel Shine Lite 5080X runs on Alcatel's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel Shine Lite 5080X back to square one. File Name: Alcatel_Shine_Lite_5080X_MT6737M_210119_6.0.zip File Size: 1.13 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Alcatel Shine Lite 5080X returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Alcatel Shine Lite 5080X |
|---|---|
| Package | Alcatel_Shine_Lite_5080X_MT6737M_210119_6.0.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6737M |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.13 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Shine Lite 5080X with SP Flash Tool
- Confirm Alcatel Shine Lite 5080X matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.13 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel Shine Lite 5080X free to download?
Yes, Alcatel Shine Lite 5080X can be downloaded free of charge from this page.
How large is the download?
The Alcatel Shine Lite 5080X package is 1.13 GB.
Which tool do I need to flash Alcatel Shine Lite 5080X?
Alcatel Shine Lite 5080X is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel Shine Lite 5080X?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.