Alcatel Pixi 8 i220
Alcatel Pixi 8 i220 is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_8_i220_MT8127_29012016_4.4.2.zip with a download size of 700 MB. It is built for the MediaTek MT8127 chipset and runs Android 4.4 (KitKat), with a firmware build date of January 29, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 43 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Pixi 8 i220
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel Pixi 8 i220 owners, this page hosts the original Alcatel stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Alcatel Pixi 8 i220 to factory condition. File Name: Alcatel_OneTouch_Pixi_8_i220_MT8127_29012016_4.4.2.zip File Size: 700 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Alcatel Pixi 8 i220 should run like a brand new unit.
File Details
| File name | Alcatel Pixi 8 i220 |
|---|---|
| Package | Alcatel_OneTouch_Pixi_8_i220_MT8127_29012016_4.4.2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT8127 |
| Android version | Android 4.4 (KitKat) |
| Build date | January 29, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 700 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Pixi 8 i220 with SP Flash Tool
- Confirm Alcatel Pixi 8 i220 matches your exact device model and that the phone uses the MT8127 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (700 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel Pixi 8 i220 free to download?
Yes, Alcatel Pixi 8 i220 can be downloaded free of charge from this page.
How large is the download?
The Alcatel Pixi 8 i220 package is 700 MB.
Which tool do I need to flash Alcatel Pixi 8 i220?
Alcatel Pixi 8 i220 is MediaTek MT8127 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel Pixi 8 i220?
This firmware is Android 4.4 (KitKat), built on January 29, 2016.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.