Alcatel Pixi 4 8050G
Alcatel Pixi 4 8050G is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_4_8050G_MT6580_6.0.zip with a download size of 3 GB. It is built for the MediaTek MT6580 chipset and runs Android 6.0 (Marshmallow). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 26 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Pixi 4 8050G
Looking for the official stock firmware for your Alcatel Pixi 4 8050G? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel Pixi 4 8050G back to square one. File Name: Alcatel_OneTouch_Pixi_4_8050G_MT6580_6.0.zip File Size: 3 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Alcatel Pixi 4 8050G should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Alcatel Pixi 4 8050G |
|---|---|
| Package | Alcatel_OneTouch_Pixi_4_8050G_MT6580_6.0.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6580 |
| Android version | Android 6.0 (Marshmallow) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 3 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Pixi 4 8050G with SP Flash Tool
- Confirm Alcatel Pixi 4 8050G matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (3 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel Pixi 4 8050G free to download?
Yes, Alcatel Pixi 4 8050G can be downloaded free of charge from this page.
How large is the download?
The Alcatel Pixi 4 8050G package is 3 GB.
Which tool do I need to flash Alcatel Pixi 4 8050G?
Alcatel Pixi 4 8050G is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel Pixi 4 8050G?
This firmware is Android 6.0 (Marshmallow).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.