Alcatel Pixi 4 8050D
Alcatel Pixi 4 8050D is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_4_8050D_MT6580_13112016.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset, with a firmware build date of November 13, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 8 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel Pixi 4 8050D
Looking for the official stock firmware for your Alcatel Pixi 4 8050D? You're in the right place. Below is the original Alcatel flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Alcatel Pixi 4 8050D to factory condition. File Name: Alcatel_OneTouch_Pixi_4_8050D_MT6580_13112016.zip File Size: 1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Alcatel Pixi 4 8050D returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Alcatel Pixi 4 8050D |
|---|---|
| Package | Alcatel_OneTouch_Pixi_4_8050D_MT6580_13112016.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6580 |
| Build date | November 13, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel Pixi 4 8050D with SP Flash Tool
- Confirm Alcatel Pixi 4 8050D matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel Pixi 4 8050D free to download?
Yes, Alcatel Pixi 4 8050D can be downloaded free of charge from this page.
How large is the download?
The Alcatel Pixi 4 8050D package is 1 GB.
Which tool do I need to flash Alcatel Pixi 4 8050D?
Alcatel Pixi 4 8050D is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.