Wiko View XL
Wiko View XL is a Wiko firmware file listed under Wiko, distributed as Wiko_View_XL_MSM8917_V15_20102017_QFIL.zip with a download size of 2 GB. It is built for the Qualcomm MSM8917 chipset, with a firmware build date of October 20, 2017. It is flashed with QFIL (part of Qualcomm QPST). It was published on June 16, 2026. This page has been viewed 15 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko View XL
The Wiko View XL runs on Wiko's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Wiko View XL to factory condition. File Name: Wiko_View_XL_MSM8917_V15_20102017_QFIL.zip File Size: 2 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. After flashing, allow a few minutes for the first boot. From there the Wiko View XL should run like a brand new unit.
File Details
| File name | Wiko View XL |
|---|---|
| Package | Wiko_View_XL_MSM8917_V15_20102017_QFIL.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | Qualcomm MSM8917 |
| Build date | October 20, 2017 |
| Flash tool | QFIL (part of Qualcomm QPST) |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko View XL with QFIL
- Confirm Wiko View XL matches your exact device model and that the phone uses the MSM8917 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the Qualcomm HS-USB QDLoader 9008 driver, then open QFIL (part of Qualcomm QPST).
- In the tool, load the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files from the extracted folder.
- Start the flash, then boot the phone into EDL mode (9008) — usually via key combo, test point, or "adb reboot edl".
- Wait for the success message before disconnecting. QFIL must detect "Qualcomm HS-USB QDLoader 9008" before you press Download.
Guides for this firmware
- How to Get Qualcomm Phones into EDL Mode for QFILTo get a Qualcomm-based phone into EDL (Emergency Download) mode for QFIL, you must trigger a specific boot state that allows the device to be recognized by your PC as a "Qualcomm HS-USB QDLoader…
- How to Fix QFIL Sahara Fail ErrorThe Sahara Fail error in QFIL occurs when the initial communication between the computer and the Qualcomm device fails. This prevents the tool from uploading the Firehose programmer, which is…
- How to Use QFIL: Qualcomm Firmware Flashing GuideQFIL (Qualcomm Flash Image Loader) is a specialized software tool used to flash stock firmware onto devices powered by Qualcomm chipsets. It is part of the Qualcomm QPST (Qualcomm Product Support…
Frequently asked questions
Is Wiko View XL free to download?
Yes, Wiko View XL can be downloaded free of charge from this page.
How large is the download?
The Wiko View XL package is 2 GB.
Which tool do I need to flash Wiko View XL?
Wiko View XL is Qualcomm MSM8917 firmware, so it is flashed with QFIL (part of Qualcomm QPST) using the programmer (prog_*_firehose*.mbn/.elf) and rawprogram/patch XML files.
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.