Wiko

Wiko View Go

Wiko_View_Go_MT6739_V01.30_210918_8.1.0.zip
June 16, 2026 Wiko 1 GB Wiko

Wiko View Go is a Wiko firmware file listed under Wiko, distributed as Wiko_View_Go_MT6739_V01.30_210918_8.1.0.zip with a download size of 1 GB. It is built for the MediaTek MT6739 chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Wiko View Go

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Wiko View Go owners, this page hosts the original Wiko stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Wiko View Go to factory condition. File Name: Wiko_View_Go_MT6739_V01.30_210918_8.1.0.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Wiko View Go should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameWiko View Go
PackageWiko_View_Go_MT6739_V01.30_210918_8.1.0.zip
Brand / PlatformWiko
CategoryWiko
ChipsetMediaTek MT6739
Android versionAndroid 8.1 (Oreo)
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Wiko View Go with SP Flash Tool

  1. Confirm Wiko View Go matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Wiko View Go free to download?

Yes, Wiko View Go can be downloaded free of charge from this page.

How large is the download?

The Wiko View Go package is 1 GB.

Which tool do I need to flash Wiko View Go?

Wiko View Go is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Wiko View Go?

This firmware is Android 8.1 (Oreo).

Which devices is this firmware for?

This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.

More Wiko files

Back to Wiko