Wiko Jimmy Och
Wiko Jimmy Och is a Wiko firmware file listed under Wiko, distributed as Wiko_Jimmy_Och_MT6582_V2_23042015.zip with a download size of 416 MB. It is built for the MediaTek MT6582 chipset, with a firmware build date of April 23, 2015. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 9 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Wiko Jimmy Och
The Wiko Jimmy Och runs on Wiko's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Wiko_Jimmy_Och_MT6582_V2_23042015.zip File Size: 416 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. When it finishes, the Wiko Jimmy Och restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Wiko Jimmy Och |
|---|---|
| Package | Wiko_Jimmy_Och_MT6582_V2_23042015.zip |
| Brand / Platform | Wiko |
| Category | Wiko |
| Chipset | MediaTek MT6582 |
| Build date | April 23, 2015 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 416 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Wiko Jimmy Och with SP Flash Tool
- Confirm Wiko Jimmy Och matches your exact device model and that the phone uses the MT6582 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (416 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6582 Firmware: Flashing Tools and Safety GuideThe MT6582 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device powered by this chipset, you will typically need the SP Flash Tool and the…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Wiko Jimmy Och free to download?
Yes, Wiko Jimmy Och can be downloaded free of charge from this page.
How large is the download?
The Wiko Jimmy Och package is 416 MB.
Which tool do I need to flash Wiko Jimmy Och?
Wiko Jimmy Och is MediaTek MT6582 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Wiko devices. Always confirm it matches your specific model before flashing.