Vertex

Vertex Impress Click

Vertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip
June 16, 2026 Vertex 1 GB Vertex

Vertex Impress Click is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset, with a firmware build date of July 11, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 25 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1 GB
Download Free

About Vertex Impress Click

If your Vertex Impress Click has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Vertex flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vertex Impress Click a fresh start without the clutter that builds up over time. File Name: Vertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Vertex Impress Click returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameVertex Impress Click
PackageVertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip
Brand / PlatformVertex
CategoryVertex
ChipsetMediaTek MT6580
Build dateJuly 11, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size1 GB
Date addedJune 16, 2026
PriceFree

How to flash Vertex Impress Click with SP Flash Tool

  1. Confirm Vertex Impress Click matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Vertex Impress Click free to download?

Yes, Vertex Impress Click can be downloaded free of charge from this page.

How large is the download?

The Vertex Impress Click package is 1 GB.

Which tool do I need to flash Vertex Impress Click?

Vertex Impress Click is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex