Vertex

Vertex Tab 3G 7-1

Vertex_Tab_3G_7-1_MT6580_FW_20180310.zip
June 16, 2026 Vertex 1015 MB Vertex

Vertex Tab 3G 7-1 is a Vertex firmware file listed under Vertex, distributed as Vertex_Tab_3G_7-1_MT6580_FW_20180310.zip with a download size of 1015 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of March 10, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 21 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1015 MB
Download Free

About Vertex Tab 3G 7-1

Looking for the official stock firmware for your Vertex Tab 3G 7-1? You're in the right place. Below is the original Vertex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Vertex Tab 3G 7-1 to factory condition. File Name: Vertex_Tab_3G_7-1_MT6580_FW_20180310.zip File Size: 1015 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Vertex Tab 3G 7-1 should boot up like new. Use the right file for your exact model and don't interrupt the process.

File Details

File nameVertex Tab 3G 7-1
PackageVertex_Tab_3G_7-1_MT6580_FW_20180310.zip
Brand / PlatformVertex
CategoryVertex
ChipsetMediaTek MT6580
Build dateMarch 10, 2018
Flash toolSP Flash Tool
Package formatZIP archive
File size1015 MB
Date addedJune 16, 2026
PriceFree

How to flash Vertex Tab 3G 7-1 with SP Flash Tool

  1. Confirm Vertex Tab 3G 7-1 matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1015 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Vertex Tab 3G 7-1 free to download?

Yes, Vertex Tab 3G 7-1 can be downloaded free of charge from this page.

How large is the download?

The Vertex Tab 3G 7-1 package is 1015 MB.

Which tool do I need to flash Vertex Tab 3G 7-1?

Vertex Tab 3G 7-1 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex