# Vertex Impress Click

> Vertex Impress Click is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset, with a firmware build date of July 11, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/vertex-impress-click-116902>

## File details

- **File name:** Vertex Impress Click
- **Package:** Vertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip
- **Brand / platform:** Vertex
- **Category:** [Vertex](https://www.filefirmware.com/category/vertex)
- **Chipset:** MediaTek MT6580
- **Build date:** July 11, 2018
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/vertex-impress-click-116902>

## About Vertex Impress Click

If your Vertex Impress Click has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Vertex flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vertex Impress Click a fresh start without the clutter that builds up over time. File Name: Vertex_Impress_Click_MT6580_HW1_R1_V05_20180711.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. With the stock ROM back in place, the Vertex Impress Click returns to factory state. If something fails, verify the file matches your model and retry.

## How to flash Vertex Impress Click with SP Flash Tool

1. Confirm Vertex Impress Click matches your exact device model and that the phone uses the MT6580 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6580 Firmware Guide: Flashing Tools and Safety](https://www.filefirmware.com/blog/mt6580-firmware-guide-flashing-tools-and-safety): The MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Vertex Impress Click free to download?

Yes, Vertex Impress Click can be downloaded free of charge from its web page.

### How large is the download?

The Vertex Impress Click package is 1 GB.

### Which tool do I need to flash Vertex Impress Click?

Vertex Impress Click is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

## More Vertex files

- [Vertex Tab 4G 8-1](https://www.filefirmware.com/file/vertex-tab-4g-8-1-116996) — 1.1 GB
- [Vertex Tab 4G 10-1](https://www.filefirmware.com/file/vertex-tab-4g-10-1-116995) — 1 GB
- [Vertex Tiger](https://www.filefirmware.com/file/vertex-tiger-116988) — 1.1 GB
- [Vertex Tab 3G 7-2](https://www.filefirmware.com/file/vertex-tab-3g-7-2-116981) — 1.2 GB
- [Vertex Tab 3G 7-1](https://www.filefirmware.com/file/vertex-tab-3g-7-1-116978) — 1015 MB
- [Vertex Impress Zeon 3G](https://www.filefirmware.com/file/vertex-impress-zeon-3g-116972) — 751 MB
- [Vertex Impress Wolf](https://www.filefirmware.com/file/vertex-impress-wolf-116960) — 1 GB
- [Vertex Impress Zeon 4G](https://www.filefirmware.com/file/vertex-impress-zeon-4g-116957) — 718 MB

---

*Source: File Firmware — <https://www.filefirmware.com/file/vertex-impress-click-116902>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
