Vertex

Vertex Tab 3G 7-2

Vertex_Tab_3G_7-2_V13_20190321_SPD.zip
June 16, 2026 Vertex 1.2 GB Vertex

Vertex Tab 3G 7-2 is a Vertex firmware file listed under Vertex, distributed as Vertex_Tab_3G_7-2_V13_20190321_SPD.zip with a download size of 1.2 GB. It is built for Unisoc (Spreadtrum)-based devices, with a firmware build date of March 21, 2019. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.2 GB
Download Free

About Vertex Tab 3G 7-2

The Vertex Tab 3G 7-2 runs on Vertex's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Vertex Tab 3G 7-2 to factory condition. File Name: Vertex_Tab_3G_7-2_V13_20190321_SPD.zip File Size: 1.2 GB Back up your files, charge the Vertex Tab 3G 7-2 past 50 percent, install the matching drivers, and only then begin. After flashing, allow a few minutes for the first boot. From there the Vertex Tab 3G 7-2 should run like a brand new unit.

File Details

File nameVertex Tab 3G 7-2
PackageVertex_Tab_3G_7-2_V13_20190321_SPD.zip
Brand / PlatformVertex
CategoryVertex
PlatformUnisoc (Spreadtrum)
Build dateMarch 21, 2019
Flash toolSPD ResearchDownload (or UpgradeDownload)
Package formatZIP archive
File size1.2 GB
Date addedJune 16, 2026
PriceFree

How to flash Vertex Tab 3G 7-2 with SPD ResearchDownload

  1. Confirm Vertex Tab 3G 7-2 matches your exact device model and that it is intended for Vertex hardware.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.2 GB) using the button above and extract it on a Windows PC.
  4. Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
  5. In the tool, load the .pac firmware file from the extracted folder.
  6. Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
  7. Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.

Frequently asked questions

Is Vertex Tab 3G 7-2 free to download?

Yes, Vertex Tab 3G 7-2 can be downloaded free of charge from this page.

How large is the download?

The Vertex Tab 3G 7-2 package is 1.2 GB.

Which tool do I need to flash Vertex Tab 3G 7-2?

Vertex Tab 3G 7-2 is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex