Alcatel One Touch Pixi 3 4013X
Alcatel One Touch Pixi 3 4013X is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_3_4013X_MT6572_4.4.2.zip with a download size of 1 GB. It is built for the MediaTek MT6572 chipset and runs Android 4.4 (KitKat). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 6 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch Pixi 3 4013X
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel One Touch Pixi 3 4013X owners, this page hosts the original Alcatel stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel One Touch Pixi 3 4013X back to square one. File Name: Alcatel_OneTouch_Pixi_3_4013X_MT6572_4.4.2.zip File Size: 1 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. With the stock ROM back in place, the Alcatel One Touch Pixi 3 4013X returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Alcatel One Touch Pixi 3 4013X |
|---|---|
| Package | Alcatel_OneTouch_Pixi_3_4013X_MT6572_4.4.2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.4 (KitKat) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch Pixi 3 4013X with SP Flash Tool
- Confirm Alcatel One Touch Pixi 3 4013X matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel One Touch Pixi 3 4013X free to download?
Yes, Alcatel One Touch Pixi 3 4013X can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch Pixi 3 4013X package is 1 GB.
Which tool do I need to flash Alcatel One Touch Pixi 3 4013X?
Alcatel One Touch Pixi 3 4013X is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel One Touch Pixi 3 4013X?
This firmware is Android 4.4 (KitKat).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.