Alcatel One Touch 4032X
Alcatel One Touch 4032X is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pop_C2_4032X_MT6572_2AALFR1_France_4.2.zip with a download size of 585 MB. It is built for the MediaTek MT6572 chipset and runs Android 4.2 (Jelly Bean). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel One Touch 4032X
If your Alcatel One Touch 4032X has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Alcatel flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Alcatel One Touch 4032X a fresh start without the clutter that builds up over time. File Name: Alcatel_OneTouch_Pop_C2_4032X_MT6572_2AALFR1_France_4.2.zip File Size: 585 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Alcatel One Touch 4032X should run like a brand new unit.
File Details
| File name | Alcatel One Touch 4032X |
|---|---|
| Package | Alcatel_OneTouch_Pop_C2_4032X_MT6572_2AALFR1_France_4.2.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6572 |
| Android version | Android 4.2 (Jelly Bean) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 585 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel One Touch 4032X with SP Flash Tool
- Confirm Alcatel One Touch 4032X matches your exact device model and that the phone uses the MT6572 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (585 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6572 Firmware: Flashing Tools and Safety GuideThe MT6572 is a MediaTek chipset used in a wide variety of Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the specific firmware for your model and…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel One Touch 4032X free to download?
Yes, Alcatel One Touch 4032X can be downloaded free of charge from this page.
How large is the download?
The Alcatel One Touch 4032X package is 585 MB.
Which tool do I need to flash Alcatel One Touch 4032X?
Alcatel One Touch 4032X is MediaTek MT6572 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel One Touch 4032X?
This firmware is Android 4.2 (Jelly Bean).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.