Alcatel 5V 5060D
Alcatel 5V 5060D is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_5V_5060D_MT6762_V1.25_260220_8.1.zip with a download size of 1.55 MB. It is built for the MediaTek MT6762 chipset and runs Android 8.1 (Oreo). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel 5V 5060D
If your Alcatel 5V 5060D has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Alcatel flash package along with the details to check before you begin. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Alcatel 5V 5060D a fresh start without the clutter that builds up over time. File Name: Alcatel_5V_5060D_MT6762_V1.25_260220_8.1.zip File Size: 1.55 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Alcatel 5V 5060D restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Alcatel 5V 5060D |
|---|---|
| Package | Alcatel_5V_5060D_MT6762_V1.25_260220_8.1.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6762 |
| Android version | Android 8.1 (Oreo) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.55 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel 5V 5060D with SP Flash Tool
- Confirm Alcatel 5V 5060D matches your exact device model and that the phone uses the MT6762 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.55 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel 5V 5060D free to download?
Yes, Alcatel 5V 5060D can be downloaded free of charge from this page.
How large is the download?
The Alcatel 5V 5060D package is 1.55 MB.
Which tool do I need to flash Alcatel 5V 5060D?
Alcatel 5V 5060D is MediaTek MT6762 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel 5V 5060D?
This firmware is Android 8.1 (Oreo).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.