Alcatel 3X 5048Y
Alcatel 3X 5048Y is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_3X_5048Y_MT6763_180610_9.0.zip with a download size of 2.21 GB. It is built for the MediaTek MT6763 chipset and runs Android 9 (Pie). It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel 3X 5048Y
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel 3X 5048Y owners, this page hosts the original Alcatel stock ROM and the key file details. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel 3X 5048Y back to square one. File Name: Alcatel_3X_5048Y_MT6763_180610_9.0.zip File Size: 2.21 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Alcatel 3X 5048Y should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Alcatel 3X 5048Y |
|---|---|
| Package | Alcatel_3X_5048Y_MT6763_180610_9.0.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6763 |
| Android version | Android 9 (Pie) |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2.21 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel 3X 5048Y with SP Flash Tool
- Confirm Alcatel 3X 5048Y matches your exact device model and that the phone uses the MT6763 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2.21 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Alcatel 3X 5048Y free to download?
Yes, Alcatel 3X 5048Y can be downloaded free of charge from this page.
How large is the download?
The Alcatel 3X 5048Y package is 2.21 GB.
Which tool do I need to flash Alcatel 3X 5048Y?
Alcatel 3X 5048Y is MediaTek MT6763 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel 3X 5048Y?
This firmware is Android 9 (Pie).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.