Alcatel A3A Plus 5058A
Alcatel A3A Plus 5058A is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_A3A_Plus_5058A_MT6739_V1.1_171107.zip with a download size of 2 GB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 5 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel A3A Plus 5058A
If your Alcatel A3A Plus 5058A has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Alcatel flash package along with the details to check before you begin. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Alcatel A3A Plus 5058A back to square one. File Name: Alcatel_OneTouch_A3A_Plus_5058A_MT6739_V1.1_171107.zip File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. Once installed, your Alcatel A3A Plus 5058A should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Alcatel A3A Plus 5058A |
|---|---|
| Package | Alcatel_OneTouch_A3A_Plus_5058A_MT6739_V1.1_171107.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6739 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel A3A Plus 5058A with SP Flash Tool
- Confirm Alcatel A3A Plus 5058A matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel A3A Plus 5058A free to download?
Yes, Alcatel A3A Plus 5058A can be downloaded free of charge from this page.
How large is the download?
The Alcatel A3A Plus 5058A package is 2 GB.
Which tool do I need to flash Alcatel A3A Plus 5058A?
Alcatel A3A Plus 5058A is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.