Alcatel 3X 5058J
Alcatel 3X 5058J is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_3X_5058J_MT6739_20180209_7.1.1.zip with a download size of 2 GB. It is built for the MediaTek MT6739 chipset and runs Android 7.1 (Nougat), with a firmware build date of February 09, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel 3X 5058J
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel 3X 5058J owners, this page hosts the original Alcatel stock ROM and the key file details. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Alcatel 3X 5058J to factory condition. File Name: Alcatel_OneTouch_3X_5058J_MT6739_20180209_7.1.1.zip File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Alcatel 3X 5058J returns to factory state. If something fails, verify the file matches your model and retry.
File Details
| File name | Alcatel 3X 5058J |
|---|---|
| Package | Alcatel_OneTouch_3X_5058J_MT6739_20180209_7.1.1.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6739 |
| Android version | Android 7.1 (Nougat) |
| Build date | February 09, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel 3X 5058J with SP Flash Tool
- Confirm Alcatel 3X 5058J matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel 3X 5058J free to download?
Yes, Alcatel 3X 5058J can be downloaded free of charge from this page.
How large is the download?
The Alcatel 3X 5058J package is 2 GB.
Which tool do I need to flash Alcatel 3X 5058J?
Alcatel 3X 5058J is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Alcatel 3X 5058J?
This firmware is Android 7.1 (Nougat), built on February 09, 2018.
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.