Vertex

Vertex Impress Vira

Vertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip
June 16, 2026 Vertex 1.3 GB Vertex

Vertex Impress Vira is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip with a download size of 1.3 GB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.3 GB
Download Free

About Vertex Impress Vira

Looking for the official stock firmware for your Vertex Impress Vira? You're in the right place. Below is the original Vertex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Vertex Impress Vira back to square one. File Name: Vertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip File Size: 1.3 GB Back up your files, charge the Vertex Impress Vira past 50 percent, install the matching drivers, and only then begin. When it finishes, the Vertex Impress Vira restarts with clean factory software. Match the firmware to your variant and follow each step in order.

File Details

File nameVertex Impress Vira
PackageVertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip
Brand / PlatformVertex
CategoryVertex
ChipsetMediaTek MT6739
Flash toolSP Flash Tool
Package formatZIP archive
File size1.3 GB
Date addedJune 16, 2026
PriceFree

How to flash Vertex Impress Vira with SP Flash Tool

  1. Confirm Vertex Impress Vira matches your exact device model and that the phone uses the MT6739 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.3 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Vertex Impress Vira free to download?

Yes, Vertex Impress Vira can be downloaded free of charge from this page.

How large is the download?

The Vertex Impress Vira package is 1.3 GB.

Which tool do I need to flash Vertex Impress Vira?

Vertex Impress Vira is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

More Vertex files

Back to Vertex