# Vertex Impress Vira

> Vertex Impress Vira is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip with a download size of 1.3 GB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/vertex-impress-vira-116956>

## File details

- **File name:** Vertex Impress Vira
- **Package:** Vertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip
- **Brand / platform:** Vertex
- **Category:** [Vertex](https://www.filefirmware.com/category/vertex)
- **Chipset:** MediaTek MT6739
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 1.3 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/vertex-impress-vira-116956>

## About Vertex Impress Vira

Looking for the official stock firmware for your Vertex Impress Vira? You're in the right place. Below is the original Vertex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Vertex Impress Vira back to square one. File Name: Vertex_Impress_Vira_MT6739_BA_HW1_R1M_V07_181030.zip File Size: 1.3 GB Back up your files, charge the Vertex Impress Vira past 50 percent, install the matching drivers, and only then begin. When it finishes, the Vertex Impress Vira restarts with clean factory software. Match the firmware to your variant and follow each step in order.

## How to flash Vertex Impress Vira with SP Flash Tool

1. Confirm Vertex Impress Vira matches your exact device model and that the phone uses the MT6739 chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (1.3 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6739 Firmware Guide: Flashing Tools and Instructions](https://www.filefirmware.com/blog/mt6739-firmware-guide-flashing-tools-and-instructions): The MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Vertex Impress Vira free to download?

Yes, Vertex Impress Vira can be downloaded free of charge from its web page.

### How large is the download?

The Vertex Impress Vira package is 1.3 GB.

### Which tool do I need to flash Vertex Impress Vira?

Vertex Impress Vira is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### Which devices is this firmware for?

This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.

## More Vertex files

- [Vertex Tab 4G 8-1](https://www.filefirmware.com/file/vertex-tab-4g-8-1-116996) — 1.1 GB
- [Vertex Tab 4G 10-1](https://www.filefirmware.com/file/vertex-tab-4g-10-1-116995) — 1 GB
- [Vertex Tiger](https://www.filefirmware.com/file/vertex-tiger-116988) — 1.1 GB
- [Vertex Tab 3G 7-2](https://www.filefirmware.com/file/vertex-tab-3g-7-2-116981) — 1.2 GB
- [Vertex Tab 3G 7-1](https://www.filefirmware.com/file/vertex-tab-3g-7-1-116978) — 1015 MB
- [Vertex Impress Zeon 3G](https://www.filefirmware.com/file/vertex-impress-zeon-3g-116972) — 751 MB
- [Vertex Impress Wolf](https://www.filefirmware.com/file/vertex-impress-wolf-116960) — 1 GB
- [Vertex Impress Zeon 4G](https://www.filefirmware.com/file/vertex-impress-zeon-4g-116957) — 718 MB

---

*Source: File Firmware — <https://www.filefirmware.com/file/vertex-impress-vira-116956>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
