Vertex Impress Pear
Vertex Impress Pear is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Pear_MT6580_HW1_R1_V12_20180806.zip with a download size of 1 GB. It is built for the MediaTek MT6580 chipset, with a firmware build date of August 06, 2018. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 10 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vertex Impress Pear
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Vertex Impress Pear owners, this page hosts the original Vertex stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Vertex_Impress_Pear_MT6580_HW1_R1_V12_20180806.zip File Size: 1 GB Back up your files, charge the Vertex Impress Pear past 50 percent, install the matching drivers, and only then begin. When it finishes, the Vertex Impress Pear restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Vertex Impress Pear |
|---|---|
| Package | Vertex_Impress_Pear_MT6580_HW1_R1_V12_20180806.zip |
| Brand / Platform | Vertex |
| Category | Vertex |
| Chipset | MediaTek MT6580 |
| Build date | August 06, 2018 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vertex Impress Pear with SP Flash Tool
- Confirm Vertex Impress Pear matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vertex Impress Pear free to download?
Yes, Vertex Impress Pear can be downloaded free of charge from this page.
How large is the download?
The Vertex Impress Pear package is 1 GB.
Which tool do I need to flash Vertex Impress Pear?
Vertex Impress Pear is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.