Vertex Impress Open
Vertex Impress Open is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Open_MT6580_20171019_5.1.zip with a download size of 485 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of October 19, 2017. It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 22 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vertex Impress Open
Vertex Impress Open Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Vertex_Impress_Open_MT6580_20171019_5.1.zip File Size: 485 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Vertex Impress Open |
|---|---|
| Package | Vertex_Impress_Open_MT6580_20171019_5.1.zip |
| Brand / Platform | Vertex |
| Category | Vertex |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | October 19, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 485 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Vertex Impress Open with SP Flash Tool
- Confirm Vertex Impress Open matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (485 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vertex Impress Open free to download?
Yes, Vertex Impress Open can be downloaded free of charge from this page.
How large is the download?
The Vertex Impress Open package is 485 MB.
Which tool do I need to flash Vertex Impress Open?
Vertex Impress Open is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Vertex Impress Open?
This firmware is Android 5.1 (Lollipop), built on October 19, 2017.
Which devices is this firmware for?
This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.