Vertex Impress Lagune
Vertex Impress Lagune is a Vertex firmware file listed under Vertex, distributed as Vertex_Impress_Lagune_MT6737M_HW1_R1_V10_270418.zip with a download size of 1.1 GB. It is built for the MediaTek MT6737M chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 19 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Vertex Impress Lagune
Looking for the official stock firmware for your Vertex Impress Lagune? You're in the right place. Below is the original Vertex flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Vertex Impress Lagune a fresh start without the clutter that builds up over time. File Name: Vertex_Impress_Lagune_MT6737M_HW1_R1_V10_270418.zip File Size: 1.1 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Vertex Impress Lagune restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Vertex Impress Lagune |
|---|---|
| Package | Vertex_Impress_Lagune_MT6737M_HW1_R1_V10_270418.zip |
| Brand / Platform | Vertex |
| Category | Vertex |
| Chipset | MediaTek MT6737M |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Vertex Impress Lagune with SP Flash Tool
- Confirm Vertex Impress Lagune matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Vertex Impress Lagune free to download?
Yes, Vertex Impress Lagune can be downloaded free of charge from this page.
How large is the download?
The Vertex Impress Lagune package is 1.1 GB.
Which tool do I need to flash Vertex Impress Lagune?
Vertex Impress Lagune is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Vertex devices. Always confirm it matches your specific model before flashing.