Lava

Lava Y30

Lava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP
June 16, 2026 Lava 2 GB Lava

Lava Y30 is a Lava firmware file listed under Lava, distributed as Lava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP with a download size of 2 GB. It is built for the MediaTek MT6737M chipset and runs Android 7.0 (Nougat), with a firmware build date of June 28, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 11 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
2 GB
Download Free

About Lava Y30

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava Y30 owners, this page hosts the original Lava stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Lava Y30 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameLava Y30
PackageLava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6737M
Android versionAndroid 7.0 (Nougat)
Build dateJune 28, 2017
Flash toolSP Flash Tool
Package formatZIP archive
File size2 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Y30 with SP Flash Tool

  1. Confirm Lava Y30 matches your exact device model and that the phone uses the MT6737M chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (2 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava Y30 free to download?

Yes, Lava Y30 can be downloaded free of charge from this page.

How large is the download?

The Lava Y30 package is 2 GB.

Which tool do I need to flash Lava Y30?

Lava Y30 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

What Android version is Lava Y30?

This firmware is Android 7.0 (Nougat), built on June 28, 2017.

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava