Lava Z93
Lava Z93 is a Lava firmware file listed under Lava, distributed as Lava_Z93_MT6765_V1.0_S162_20190613.zip with a download size of 2 GB. It is built for the MediaTek MT6765 chipset, with a firmware build date of June 13, 2019. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 18 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lava Z93
If your Lava Z93 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Lava flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lava_Z93_MT6765_V1.0_S162_20190613.zip File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. When it finishes, the Lava Z93 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Lava Z93 |
|---|---|
| Package | Lava_Z93_MT6765_V1.0_S162_20190613.zip |
| Brand / Platform | Lava |
| Category | Lava |
| Chipset | MediaTek MT6765 |
| Build date | June 13, 2019 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 2 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lava Z93 with SP Flash Tool
- Confirm Lava Z93 matches your exact device model and that the phone uses the MT6765 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (2 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6765 Firmware Guide: Tools and Flashing InstructionsThe MT6765 is a MediaTek chipset used across a wide variety of budget and mid-range Android devices. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- SP Flash Tool: Download Only vs Format All + DownloadSP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
Frequently asked questions
Is Lava Z93 free to download?
Yes, Lava Z93 can be downloaded free of charge from this page.
How large is the download?
The Lava Z93 package is 2 GB.
Which tool do I need to flash Lava Z93?
Lava Z93 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Lava devices. Always confirm it matches your specific model before flashing.