# Lava Y30

> Lava Y30 is a Lava firmware file listed under Lava, distributed as Lava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP with a download size of 2 GB. It is built for the MediaTek MT6737M chipset and runs Android 7.0, with a firmware build date of June 28, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. It is available to download free of charge.

Web page: <https://www.filefirmware.com/file/lava-y30-104575>

## File details

- **File name:** Lava Y30
- **Package:** Lava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP
- **Brand / platform:** Lava
- **Category:** [Lava](https://www.filefirmware.com/category/lava)
- **Chipset:** MediaTek MT6737M
- **Android version:** Android 7.0 (Nougat)
- **Build date:** June 28, 2017
- **Flash tool:** SP Flash Tool
- **Package format:** ZIP archive
- **File size:** 2 GB
- **Date added:** June 16, 2026
- **Price:** Free
- **Download:** On the web page: <https://www.filefirmware.com/file/lava-y30-104575>

## About Lava Y30

Sometimes a clean firmware install is the best fix for a misbehaving phone. For Lava Y30 owners, this page hosts the original Lava stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Lava_Y30_1_V1.0_M01_MT6737M_20170628_ENG_IN_7.0.ZIP File Size: 2 GB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. With the stock ROM back in place, the Lava Y30 returns to factory state. If something fails, verify the file matches your model and retry.

## How to flash Lava Y30 with SP Flash Tool

1. Confirm Lava Y30 matches your exact device model and that the phone uses the MT6737M chipset.
2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
3. Download the file (2 GB) from the web page and extract it on a Windows PC.
4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

## Guides for this firmware

- [MT6737M Firmware: Flashing Guide and Supported Devices](https://www.filefirmware.com/blog/mt6737m-firmware-flashing-guide-and-supported-devices): The MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- [SP Flash Tool: Download Only vs Format All + Download](https://www.filefirmware.com/blog/sp-flash-tool-download-only-vs-format-all-download): SP Flash Tool is a utility used to flash firmware onto devices powered by MediaTek chipsets. When using this tool, you must choose between different download modes; "Download Only" is the recommended…
- [Installing MediaTek VCOM Drivers for SP Flash Tool](https://www.filefirmware.com/blog/installing-mediatek-vcom-drivers-for-sp-flash-tool): To flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…

## Frequently asked questions

### Is Lava Y30 free to download?

Yes, Lava Y30 can be downloaded free of charge from its web page.

### How large is the download?

The Lava Y30 package is 2 GB.

### Which tool do I need to flash Lava Y30?

Lava Y30 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

### What Android version is Lava Y30?

This firmware is Android 7.0 (Nougat), built on June 28, 2017.

### Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

## More Lava files

- [Lava Z3 LZG403](https://www.filefirmware.com/file/lava-z3-lzg403-104700) — 1.96 GB
- [Lava Z93P](https://www.filefirmware.com/file/lava-z93p-104619) — 1.59 GB
- [Lava Z93](https://www.filefirmware.com/file/lava-z93-104613) — 2 GB
- [Lava Z7H Plus](https://www.filefirmware.com/file/lava-z7h-plus-104612) — 286 MB
- [Lava Z71](https://www.filefirmware.com/file/lava-z71-104607) — 3 GB
- [Lava Z7H](https://www.filefirmware.com/file/lava-z7h-104604) — 271 MB
- [Lava Z7G](https://www.filefirmware.com/file/lava-z7g-104602) — 377 MB
- [Lava Z66](https://www.filefirmware.com/file/lava-z66-104600) — 1.6 GB

---

*Source: File Firmware — <https://www.filefirmware.com/file/lava-y30-104575>. Markdown copy of the page for AI assistants; download links are only on the web page. When citing, link to the web page.*
