Lava

Lava Z3 LZG403

Lava_Z3_LZG403_MT6765_SW_V01_HW_V2.0_220627.zip
June 16, 2026 Lava 1.96 GB Lava

Lava Z3 LZG403 is a Lava firmware file listed under Lava, distributed as Lava_Z3_LZG403_MT6765_SW_V01_HW_V2.0_220627.zip with a download size of 1.96 GB. It is built for the MediaTek MT6765 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 20 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
1.96 GB
Download Free

About Lava Z3 LZG403

The Lava Z3 LZG403 runs on Lava's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It can rescue a bricked handset, fix IMEI or baseband errors, and give the Lava Z3 LZG403 a fresh start without the clutter that builds up over time. File Name: Lava_Z3_LZG403_MT6765_SW_V01_HW_V2.0_220627.zip File Size: 1.96 GB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. After flashing, allow a few minutes for the first boot. From there the Lava Z3 LZG403 should run like a brand new unit.

File Details

File nameLava Z3 LZG403
PackageLava_Z3_LZG403_MT6765_SW_V01_HW_V2.0_220627.zip
Brand / PlatformLava
CategoryLava
ChipsetMediaTek MT6765
Flash toolSP Flash Tool
Package formatZIP archive
File size1.96 GB
Date addedJune 16, 2026
PriceFree

How to flash Lava Z3 LZG403 with SP Flash Tool

  1. Confirm Lava Z3 LZG403 matches your exact device model and that the phone uses the MT6765 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (1.96 GB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Lava Z3 LZG403 free to download?

Yes, Lava Z3 LZG403 can be downloaded free of charge from this page.

How large is the download?

The Lava Z3 LZG403 package is 1.96 GB.

Which tool do I need to flash Lava Z3 LZG403?

Lava Z3 LZG403 is MediaTek MT6765 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Lava devices. Always confirm it matches your specific model before flashing.

More Lava files

Back to Lava