Lava Z93P
Lava Z93P is a Lava firmware file listed under Lava, distributed as Lava_Z93P_SW_V01_201205_SPD.zip.zip.zip.zip.zip.zip with a download size of 1.59 GB. It is built for Unisoc (Spreadtrum)-based devices. It is flashed with SPD ResearchDownload (or UpgradeDownload). It was published on June 16, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Lava Z93P
The Lava Z93P runs on Lava's factory software, and sometimes you need to reinstall it from scratch. This page provides the genuine stock ROM so you can return the device to its original state. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Lava Z93P to factory condition. File Name: Lava_Z93P_SW_V01_201205_SPD.zip.zip.zip.zip.zip.zip File Size: 1.59 GB Back up your files, charge the Lava Z93P past 50 percent, install the matching drivers, and only then begin. Once installed, your Lava Z93P should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Lava Z93P |
|---|---|
| Package | Lava_Z93P_SW_V01_201205_SPD.zip.zip.zip.zip.zip.zip |
| Brand / Platform | Lava |
| Category | Lava |
| Platform | Unisoc (Spreadtrum) |
| Flash tool | SPD ResearchDownload (or UpgradeDownload) |
| Package format | ZIP archive |
| File size | 1.59 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Lava Z93P with SPD ResearchDownload
- Confirm Lava Z93P matches your exact device model and that it is intended for Lava hardware.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.59 GB) using the button above and extract it on a Windows PC.
- Install the SPD / Unisoc USB drivers, then open SPD ResearchDownload (or UpgradeDownload).
- In the tool, load the .pac firmware file from the extracted folder.
- Start the flash, then press Start in the tool, then connect the powered-off phone while holding Volume Down (boot key).
- Wait for the success message before disconnecting. Leave "Erase NV" unticked unless you intend to wipe IMEI and calibration data.
Guides for this firmware
- Connecting Unisoc Phones to SPD ResearchDownloadSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. To connect a phone to this tool…
- Flashing .pac Files with SPD ResearchDownload GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It is primarily used to unbrick…
- How to Use SPD ResearchDownload: Firmware Flashing GuideSPD ResearchDownload (also known as UpgradeDownload) is a specialized flashing tool used to install stock firmware on devices powered by Unisoc (Spreadtrum) chipsets. It allows technicians and users…
Frequently asked questions
Is Lava Z93P free to download?
Yes, Lava Z93P can be downloaded free of charge from this page.
How large is the download?
The Lava Z93P package is 1.59 GB.
Which tool do I need to flash Lava Z93P?
Lava Z93P is Unisoc (Spreadtrum) firmware, so it is flashed with SPD ResearchDownload (or UpgradeDownload) using the .pac firmware file.
Which devices is this firmware for?
This file is intended for Lava devices. Always confirm it matches your specific model before flashing.