Alcatel 5012G
Alcatel 5012G is a Alcatel firmware file listed under Alcatel, distributed as Alcatel_OneTouch_Pixi_4_5.5_5012G_MT6580_20171014_6.0.zip with a download size of 971 MB. It is built for the MediaTek MT6580 chipset, with a firmware build date of October 14, 2017. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 4 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Alcatel 5012G
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Alcatel 5012G owners, this page hosts the original Alcatel stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Alcatel_OneTouch_Pixi_4_5.5_5012G_MT6580_20171014_6.0.zip File Size: 971 MB Back up everything important first, keep the battery above the halfway mark, use a cable you trust, and make sure the right drivers are installed. After flashing, allow a few minutes for the first boot. From there the Alcatel 5012G should run like a brand new unit.
File Details
| File name | Alcatel 5012G |
|---|---|
| Package | Alcatel_OneTouch_Pixi_4_5.5_5012G_MT6580_20171014_6.0.zip |
| Brand / Platform | Alcatel |
| Category | Alcatel |
| Chipset | MediaTek MT6580 |
| Build date | October 14, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 971 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Alcatel 5012G with SP Flash Tool
- Confirm Alcatel 5012G matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (971 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Alcatel 5012G free to download?
Yes, Alcatel 5012G can be downloaded free of charge from this page.
How large is the download?
The Alcatel 5012G package is 971 MB.
Which tool do I need to flash Alcatel 5012G?
Alcatel 5012G is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Alcatel devices. Always confirm it matches your specific model before flashing.