Homtom HT3
Homtom HT3 is a Homtom firmware file listed under HomTom, distributed as Homtom_HT3_MT6580_20160706_5.1.zip with a download size of 608 MB. It is built for the MediaTek MT6580 chipset and runs Android 5.1 (Lollipop), with a firmware build date of July 06, 2016. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 37 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Homtom HT3
Sometimes a clean firmware install is the best fix for a misbehaving phone. For Homtom HT3 owners, this page hosts the original Homtom stock ROM and the key file details. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Homtom_HT3_MT6580_20160706_5.1.zip File Size: 608 MB Copy your data somewhere safe, top up the battery, grab a working USB cable, and confirm the proper drivers are set up before you start. Once installed, your Homtom HT3 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Homtom HT3 |
|---|---|
| Package | Homtom_HT3_MT6580_20160706_5.1.zip |
| Brand / Platform | Homtom |
| Category | HomTom |
| Chipset | MediaTek MT6580 |
| Android version | Android 5.1 (Lollipop) |
| Build date | July 06, 2016 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 608 MB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Homtom HT3 with SP Flash Tool
- Confirm Homtom HT3 matches your exact device model and that the phone uses the MT6580 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (608 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6580 Firmware Guide: Flashing Tools and SafetyThe MT6580 is a MediaTek chipset used in a wide variety of entry-level Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware package…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Homtom HT3 free to download?
Yes, Homtom HT3 can be downloaded free of charge from this page.
How large is the download?
The Homtom HT3 package is 608 MB.
Which tool do I need to flash Homtom HT3?
Homtom HT3 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Homtom HT3?
This firmware is Android 5.1 (Lollipop), built on July 06, 2016.
Which devices is this firmware for?
This file is intended for Homtom devices. Always confirm it matches your specific model before flashing.