Homtom Zoji Z33
Homtom Zoji Z33 is a Homtom firmware file listed under HomTom, distributed as Homtom_Zoji_Z33_MT6739_V1.0.9_181123.zip with a download size of 1 GB. It is built for the MediaTek MT6739 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 38 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Homtom Zoji Z33
Looking for the official stock firmware for your Homtom Zoji Z33? You're in the right place. Below is the original Homtom flash file you need to restore your device, whether you're fixing a software issue or starting fresh. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Homtom Zoji Z33 to factory condition. File Name: Homtom_Zoji_Z33_MT6739_V1.0.9_181123.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. Once installed, your Homtom Zoji Z33 should boot up like new. Use the right file for your exact model and don't interrupt the process.
File Details
| File name | Homtom Zoji Z33 |
|---|---|
| Package | Homtom_Zoji_Z33_MT6739_V1.0.9_181123.zip |
| Brand / Platform | Homtom |
| Category | HomTom |
| Chipset | MediaTek MT6739 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Homtom Zoji Z33 with SP Flash Tool
- Confirm Homtom Zoji Z33 matches your exact device model and that the phone uses the MT6739 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6739 Firmware Guide: Flashing Tools and InstructionsThe MT6739 is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Homtom Zoji Z33 free to download?
Yes, Homtom Zoji Z33 can be downloaded free of charge from this page.
How large is the download?
The Homtom Zoji Z33 package is 1 GB.
Which tool do I need to flash Homtom Zoji Z33?
Homtom Zoji Z33 is MediaTek MT6739 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Homtom devices. Always confirm it matches your specific model before flashing.