Homtom HomTom S9 Plus
Homtom HomTom S9 Plus is a Homtom firmware file listed under HomTom, distributed as HomTom_S9_Plus_MT6750_V05_180131.zip with a download size of 1 GB. It is built for the MediaTek MT6750 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 41 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Homtom HomTom S9 Plus
If your Homtom HomTom S9 Plus has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Homtom flash package along with the details to check before you begin. It fixes random reboots, crashing apps, a phone stuck on the splash screen, or a botched OTA update, and removes leftover bloat by returning the Homtom HomTom S9 Plus to factory condition. File Name: HomTom_S9_Plus_MT6750_V05_180131.zip File Size: 1 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Homtom HomTom S9 Plus restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Homtom HomTom S9 Plus |
|---|---|
| Package | HomTom_S9_Plus_MT6750_V05_180131.zip |
| Brand / Platform | Homtom |
| Category | HomTom |
| Chipset | MediaTek MT6750 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Homtom HomTom S9 Plus with SP Flash Tool
- Confirm Homtom HomTom S9 Plus matches your exact device model and that the phone uses the MT6750 chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
- Fix SP Flash Tool Error 4032: S_FT_ENABLE_DRAM_FAILSP Flash Tool Error 4032, also known as S_FT_ENABLE_DRAM_FAIL , occurs when the software cannot initialize the device's internal memory (DRAM) during the flashing process. This typically happens due…
Frequently asked questions
Is Homtom HomTom S9 Plus free to download?
Yes, Homtom HomTom S9 Plus can be downloaded free of charge from this page.
How large is the download?
The Homtom HomTom S9 Plus package is 1 GB.
Which tool do I need to flash Homtom HomTom S9 Plus?
Homtom HomTom S9 Plus is MediaTek MT6750 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Homtom devices. Always confirm it matches your specific model before flashing.