Homtom HT80
Homtom HT80 is a Homtom firmware file listed under HomTom, distributed as Homtom_HT80_MT6737M_V1.1.9_2G_16G_20200326.zip with a download size of 1.8 GB. It is built for the MediaTek MT6737M chipset, with a firmware build date of March 26, 2020. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 38 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Homtom HT80
If your Homtom HT80 has been giving you trouble, reinstalling the stock firmware is often the cleanest fix. Here you'll find the full Homtom flash package along with the details to check before you begin. Flashing the stock ROM can clear boot loops, failed updates, a frozen logo screen, or sluggish performance, replacing the system software with a known good copy. File Name: Homtom_HT80_MT6737M_V1.1.9_2G_16G_20200326.zip File Size: 1.8 GB Before flashing, back up your data (the process wipes the device), charge above 50 percent, and install the correct USB drivers on your computer. When it finishes, the Homtom HT80 restarts with clean factory software. Match the firmware to your variant and follow each step in order.
File Details
| File name | Homtom HT80 |
|---|---|
| Package | Homtom_HT80_MT6737M_V1.1.9_2G_16G_20200326.zip |
| Brand / Platform | Homtom |
| Category | HomTom |
| Chipset | MediaTek MT6737M |
| Build date | March 26, 2020 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 1.8 GB |
| Date added | June 16, 2026 |
| Price | Free |
How to flash Homtom HT80 with SP Flash Tool
- Confirm Homtom HT80 matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (1.8 GB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Homtom HT80 free to download?
Yes, Homtom HT80 can be downloaded free of charge from this page.
How large is the download?
The Homtom HT80 package is 1.8 GB.
Which tool do I need to flash Homtom HT80?
Homtom HT80 is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
Which devices is this firmware for?
This file is intended for Homtom devices. Always confirm it matches your specific model before flashing.