Homtom HT30 Pro
Homtom HT30 Pro is a HomTom firmware file listed under HomTom, distributed as Homtom_HT30_Pro_MT6737m_20170504_7.0.zip with a download size of 953 MB. It is built for the MediaTek MT6737M chipset and runs Android 7.0 (Nougat), with a firmware build date of May 04, 2017. It is flashed with SP Flash Tool. It was published on April 28, 2026. This page has been viewed 17 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.
About Homtom HT30 Pro
Homtom HT30 Pro Stock Firmware (Flash File) The Flash File will help you Upgrade, Downgrade, or re-install the Stock Firmware (OS) on your Mobile Device. In addition, the Flash File (ROM) also enables you to repair the Mobile device if facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue. File Name: Homtom_HT30_Pro_MT6737m_20170504_7.0.zip File Size: 953 MB Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux How to Flash (install): Follow Tutorial (Mediafire)
File Details
| File name | Homtom HT30 Pro |
|---|---|
| Package | Homtom_HT30_Pro_MT6737m_20170504_7.0.zip |
| Brand / Platform | HomTom |
| Category | HomTom |
| Chipset | MediaTek MT6737M |
| Android version | Android 7.0 (Nougat) |
| Build date | May 04, 2017 |
| Flash tool | SP Flash Tool |
| Package format | ZIP archive |
| File size | 953 MB |
| Date added | April 28, 2026 |
| Price | Free |
How to flash Homtom HT30 Pro with SP Flash Tool
- Confirm Homtom HT30 Pro matches your exact device model and that the phone uses the MT6737M chipset.
- Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
- Download the file (953 MB) using the button above and extract it on a Windows PC.
- Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
- In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
- Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
- Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.
Guides for this firmware
- MT6737M Firmware: Flashing Guide and Supported DevicesThe MT6737M is a MediaTek chipset used in a wide variety of budget Android smartphones and tablets. To reflash or unbrick a device using this chipset, you will need the correct firmware for your…
- Installing MediaTek VCOM Drivers for SP Flash ToolTo flash firmware on a MediaTek-based device, you must use the SP Flash Tool in conjunction with MediaTek VCOM USB drivers. These drivers allow your computer to communicate with the device's chipset…
- What is a Scatter File? Loading MediaTek Firmware in SP Flash ToolA scatter file is a text document, typically named MTxxxx_Android_scatter.txt , that acts as a map for the SP Flash Tool. It tells the software exactly where each partition of the firmware should be…
Frequently asked questions
Is Homtom HT30 Pro free to download?
Yes, Homtom HT30 Pro can be downloaded free of charge from this page.
How large is the download?
The Homtom HT30 Pro package is 953 MB.
Which tool do I need to flash Homtom HT30 Pro?
Homtom HT30 Pro is MediaTek MT6737M firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).
What Android version is Homtom HT30 Pro?
This firmware is Android 7.0 (Nougat), built on May 04, 2017.
Which devices is this firmware for?
This file is intended for HomTom devices. Always confirm it matches your specific model before flashing.