Walton

Walton Primo E10

Walton_Primo_E10_MT6580_S06_160719.zip
June 16, 2026 Walton 590 MB Walton

Walton Primo E10 is a Walton firmware file listed under Walton, distributed as Walton_Primo_E10_MT6580_S06_160719.zip with a download size of 590 MB. It is built for the MediaTek MT6580 chipset. It is flashed with SP Flash Tool. It was published on June 16, 2026. This page has been viewed 24 times. It is available to download free of charge. Before flashing, verify the file matches your exact device model and back up your data.

File Size
590 MB
Download Free

About Walton Primo E10

Looking for the official stock firmware for your Walton Primo E10? You're in the right place. Below is the original Walton flash file you need to restore your device, whether you're fixing a software issue or starting fresh. Whether an update corrupted the system or a root attempt went wrong, the factory ROM puts the Walton Primo E10 back to square one. File Name: Walton_Primo_E10_MT6580_S06_160719.zip File Size: 590 MB Back up your files, charge the Walton Primo E10 past 50 percent, install the matching drivers, and only then begin. With the stock ROM back in place, the Walton Primo E10 returns to factory state. If something fails, verify the file matches your model and retry.

File Details

File nameWalton Primo E10
PackageWalton_Primo_E10_MT6580_S06_160719.zip
Brand / PlatformWalton
CategoryWalton
ChipsetMediaTek MT6580
Flash toolSP Flash Tool
Package formatZIP archive
File size590 MB
Date addedJune 16, 2026
PriceFree

How to flash Walton Primo E10 with SP Flash Tool

  1. Confirm Walton Primo E10 matches your exact device model and that the phone uses the MT6580 chipset.
  2. Back up your personal data, as flashing firmware can erase the device. Charge the battery above 50%.
  3. Download the file (590 MB) using the button above and extract it on a Windows PC.
  4. Install the MediaTek VCOM / USB drivers, then open SP Flash Tool.
  5. In the tool, load the scatter file (MTxxxx_Android_scatter.txt) from the extracted folder.
  6. Start the flash, then power the phone off, then connect it (hold Volume Up or Down if it is not detected).
  7. Wait for the success message before disconnecting. Use "Download Only" — "Format All + Download" erases IMEI/NVRAM calibration.

Frequently asked questions

Is Walton Primo E10 free to download?

Yes, Walton Primo E10 can be downloaded free of charge from this page.

How large is the download?

The Walton Primo E10 package is 590 MB.

Which tool do I need to flash Walton Primo E10?

Walton Primo E10 is MediaTek MT6580 firmware, so it is flashed with SP Flash Tool using the scatter file (MTxxxx_Android_scatter.txt).

Which devices is this firmware for?

This file is intended for Walton devices. Always confirm it matches your specific model before flashing.

More Walton files

Back to Walton